~10 modelsPilot · The Gemini
Aluminium
- Sliding & swing
- Powder-coated to any RAL
- Fixed KEP profiles
NewGate configuration, reimagined
Measureonce.Builditexactly.
Enter the site details. Get a true-to-size 3D gate, a to-scale drawing and a cut list, ready to download, all from your own sizing rules.
Model
The Virgo
Aluminium · Swing pair
RAL 7016 · Anthracite Grey
4,200 × 1,800mm
Drag the gate to rotate
0+
Gate models in one library
0
Materials: aluminium, timber, steel
0 mm
Drawing resolution
0
Guesswork. Every size follows a rule
How it works
Four steps.
Zero redraws.
Survey detailsJob 2403
AMin pier height (LHS)
1750mm
BMin pier height (RHS)
1750mm
CWidth between piers
5100mm
FCapping height
50mm
GCapping width
600mm
HPier width
500mm
Gate generator
Enter the details. Get your gate.
Fill in the details and your gate is generated as you type, in 3D and as a to-scale drawing, ready to download.
Your details
2 × 2,080 × 1,725 mm94 kg
Workshop output
From preview to workshop. In one click.
The sheet layout your workshop already uses, resized to site. Drawing, cut list and 3D preview come from one set of rules, so they always agree.
GC-0001-VGO-SW-010.pdf · A3
Cut list
The Virgo| # | Part | Qty | Length | Weight |
|---|---|---|---|---|
| 1 | KEP-1Frame stile 60 × 60 | 4 | 1,555 | 11.8 kg |
| 2 | KEP-2Frame rail 60 × 60 | 4 | 2,080 | 15.8 kg |
| 3 | KEP-7Infill slat 100 × 20 | 28 | 1,960 | 60.4 kg |
| 4 | SPK-006APier hinge bracket assembly | 2 | — | 5.9 kg |
| 5 | SPK-012Drop bolt & keep | 1 | — | 0.4 kg |
| Total assembly weight | 94.31 kg | |||
Gate library
One library. Every material.
Each model is built once from your DXF files and then resized to any opening. We start with one pilot from each family and add the rest in batches of five, each one signed off by you.
~2 modelsPilot · Timber Clad
Timber / PVC clad
- Clad over a metal frame
- Board layout follows width
- Warm, natural finish
10–12 modelsPilot · Steel Railing
Steel
- Bar & railing designs
- Galvanising options
- Heavier-duty hardware
Swipe to see all three
Rules, not guesses.
Every dimension comes from fixed sizing rules taken from your existing drawings and signed off by you. No AI estimates, and no surprises on the workshop floor.
01
Drawings match your samples.
Generated drawings are checked against your own sample drawings at the same sizes before anything ships.
02
The preview matches the order.
The 3D model always shows the chosen model, size and colour. What the customer approves is what gets built.
03
The cut list matches the drawing.
Every profile, quantity and length agrees with the drawing at every test size.